BiPAC 4500NZL R2
LTE Wireless Router
The BiPAC 4500NZL R2 supports the state-of-the-art LTE network which is reliable, scalable and flexible for indoor applications. Embedded with LTE module and Gigabit EWAN interfaces, the BiPAC 4500NZL R2 enables high-speed and secured Internet connectivity for home, SOHO, and enterprise users. With an integrated 802.11n 2.4GHz wireless access point and 4-port Gigabit Ethernet LAN, the BiPAC 4500NZL R2 can run 10 times faster LAN connection than the regular Fast Ethernet LAN.
How to make internet connection stable and faster
9 ways to Improve your Wi-Fi router speed
Key Features & Benefits
Key Features
High-speed Mobile Wireless Communication
- Embedded high performance LTE module *1
- High performance external antenna
Embedded LTE *1
- Frequency bands and data rare depend on equipped LTE module
Network Protocols and Features
- Dual WAN Failover/ Failback
- IPv4, IPv6, IPv4/IPv6 dual stack *2
- Dual APN *3
- Keep Alive
- IP Pass-Through
- NAT, Virtual Server and DMZ
- Static Routing, Dynamic Routing (RIP v1/v2, OSPF, BGP)
- SNTP, DNS relay and DDNS
- Universal Plug and Play (UPnP) compliant
- Supports DHCP server/ client/ relay
Firewall
Built-in NAT Firewall
- Stateful Packet Inspection (SPI)
- Prevents DoS attacks including Land Attack, Ping of Death, etc.
- Access control
- IP filtering, MAC filtering, URL filtering
- VPN pass-through
Wireless LAN
IEEE 802.11b/g/n 2.4GHz compliant
- Up to 300Mbps wireless operation rate at 2.4GHz
- High transmission power
- 64/128 bits WEP supported for encryption
- Wireless security with WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK
- WPS (Wi-Fi Protected Setup) for easy setup
- Multiple wireless SSIDs
- Wireless MAC Filtering
- Wireless Client Isolation
- Storage/NAS: FTP server, SAMBA server
Management
- Password protection for system management
- Quick installation wizard
- Web-based GUI for remote and local management
- Firmware upgrades and configuration data upload and download via web-based GUI
- TR-069(CWMP) *2 , SNMP
- LTE Usage Allowance
- Syslog monitoring
- Physical layer/protocol diagnostic test tool
- Scheduling Auto-Reboot
*Note:
1. The LTE is dependent on your local service provider.
2. Only upon request for Telco/ ISP tender projects.
3. Dual APN is not supported on some specific SKU, please confirm it with our sales.
4. Specifications in this datasheet are subject to change without prior notice
Application Diagram
VPN Redundancy with LTE network
We provide LTE network communication products featuring secure VPN redundancy solutions to keep your data under reliable network protection. Retail POS (Point-of-Sales) and remote office’s VPN will fail over to 4G LTE network in the situation where the original connection fails. This failover and failback are imperative for business customers who need a reliable VPN redundancy solution with seamless connectivity. The next generation of LTE assures a high-speed network environment to meet your transmission demands.
Specifications
| WAN Interface | |
|---|---|
| LTE | ● |
| Ethernet WAN | ●GbE (*1) |
*1: Software configurable EWAN
| Hardware Interface | |
|---|---|
| SIM slot | ● (x1) |
| Gigabit Ethernet | ● (x4) (Configurable EWAN x1) |
| 802.11n (2.4GHz) | 300 Mbps (2x2) |
| 802.11ac (5GHz) | - |
| USB Host | ● (USB 2.0) |
| FXS | - |
| Features | |
|---|---|
| VPN | - |
| IPv4 / IPv6 | ● |
| Dual APN | ● (*2) |
| Dual WAN (Failover/Failback) | ● |
| Dual WAN (Load Balance) | ● |
| Interface Grouping | ● |
| Hardware Specifications | |
|---|---|
| Physical Specifications | Dimensions: 9.04" x 6.10" x 1.69" (229.5 mm x 155 mm x 43mm) |
| Power Requirements | Input: 15V DC, 1.6A |
| Operating Environment | Operating temperature: 0°C ~ 40 °C |
| Humidity | 20% - 95% non-condensing |
*2: Dual APNs is only upon request for Telco/ ISP tender projects.
