IPTV and Triple Play
The BiPAC 7402H series complies with ADSL worldwide standards. It supports downstream rates of up to 12/24 Mbps with ADSL2/2+, a rate of 8Mbps with ADSL and upstream rates of up to 1 Mbps. Users enjoy not only high-speed ADSL service but also broadband multimedia applications such as interactive gaming, video streaming and real-time audio much faster and more easily than ever. In particular, the router also supports the latest ADSL2/2+ Annex M technology for higher upload speeds by doubling the upstream data rate. Through HPNA (HomePNA3.0 over Phone line) or HCNA (HomePNA3.0 over Coax), users can enjoy IPTV as well as high-speed Internet service, interactive gaming and real-time audio in every room.

No Additional Cables or Wiring Required
You can utilize the existing coaxial cable or phone line network in your home to enjoy ADSL service. By simply connecting the coaxial cable to the router, you can extend high-speed ADSL applications without extra equipment or new wiring. With this plug-and-play device, there’s no need to make the extra effort of rebuilding your home network.

Smooth and Responsive Net Connection
The Quality of Service (QoS) feature helps users manage bandwidth and prioritize data traffic effectively. It gives you full control over any type of data traffic. It ensures that latency-sensitive and bandwidth-consuming applications and data such as P2P sharing programs, VoIP calls, video streaming, and gaming packets can move through the router at lightning speed, even under a heavy load. You can control the speed of inbound and outbound data passing through the router to ensure that users do not saturate the bandwidth with their browsing activities.

Robust Firewall Security
Along with the built-in NAT natural firewall feature, the router also provides advanced anti-hacker pattern-filtering protection by automatically detecting and blocking Denial of Service (DoS) attacks. Built with Stateful Packet Inspection (SPI), the router enables users to determine whether or not a data packet is allowed to pass through the firewall to the private LAN.

Illustration of Home Networking with HPNA 3.0 Coax

Illustration of Home Networking with HPNA 3.0 Phoneline

The BiPAC 7402H series makes it easy to set up a home entertainment network. Please refer to the following connection illustration.

網路應用圖 of Home Networking with HomePNA 3.0 Coax

網路應用圖 of Home Networking with HomePNA 3.0 Phoneline

ADSL Compliance
• Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
• Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)
(Available for Annex M model only)
• Compliant with ADSL2+ Standard
- G.dmt.bisplus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(Available for Annex M model only)

Network Protocols and Features
• NAT, static routing and RIP-1/2
• Universal Plug and Play (UPnP) Compliant
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
• POP3 (email account checking)
• IGMP Snooping for video service

Firewall
• Built-in NAT firewall
• Stateful Packet Inspection (SPI)
• Prevent DoS attacks including IP Spoofing, Land Attack, Smurf Attack, Ping of Death, TCP SYN Flooding, etc.
• Packet Filtering – port, source IP address, destination IP address, MAC address
• URL Content Filtering – string or domain name detection in URL string

HomePNA3.0 Compliance
• Spectrum: 4-21MHz (BiPAC 7402HC and BiPAC 7402HCG)
• Data Rate: Up to 128Mbps
• F-Type Female Coax Connector: 2, one for HomePNA over Coax, one for TV signal bypass (BiPAC 7402HC and BiPAC 7402HCG)
• Phone line Connector (RJ-11): 2, one for HomePNA over Phone line, one for PSTN signal bypass (BiPAC 7402HP and BiPAC 7402HPG)

Quality of Service Control
• Support DiffServ approach
• Traffic prioritization and bandwidth management based-on IP protocol, port number and address

ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• Classical IP over ATM (RFC 1577)
• MAC Encapsulated Routing (RFC 1483 MER)
• OAM F4/F5

Management
• Quick Installation Wizard and Auto-scan ADSL settings
• Web-based GUI for remote and local management
• Firmware upgrade and configuration data upload and download via Web-based GUI
• Embedded Telnet server for remote and local management
• Available Syslog monitoring
• SNMP v3, MIB-I and MIB-II support
• Support DHCP server/client/relay

Hardware Specification
Physical Interface
• WALN: antenna (BiPAC 7402HCG and 7402HPG)
• WAN: ADSL port
• LAN: 4-port 10/100M auto-crossover (MDI/MDI-X) Switch
• Console: the Ethernet Port # 4 can be also connected to console
• HCNA and TV : F-Type Coax Connectors (BiPAC 7402HC and BiPAC 7402HCG)
• HPNA and Phone: RJ-11 Connectors (BiPAC 7402HP and BiPAC 7402HPG)
• Factory default reset button
• Power jack
• Power switch
Physical Specification
• Dimensions: 8.27" x 5.83" x 1.42" (210mm x 148mm x 36mm)
Power Requirement
• Input: 12VDC, 1A
Operating Environment
• Operating temperature: 0 ~ 40oC
• Storage temperature: -20 ~ 70oC
• Humidity: 20 ~ 95% non-condensing

Models & Standards Support
Product Models
BiPAC 7402HC Coax ADSL2+ Router
BiPAC 7402HCG 802.11g Coax ADSL2+ Router
BiPAC 7402HP Phoneline ADSL2+ Router
BiPAC 7402HPG 802.11g Phoneline ADSL2+ Router

Standards
• BiPAC 7402HxxM: Annex M
• BiPAC 7402HxxU: Annex B & U-R2
• Annex M support ADSL over POTS
• Annex B and Annex U-R2 support ADSL over ISDN