There are two ways to reset to the factory default; hardware reset and software reset:

Hardware reset
Please press and hold the reset button for more than 6 seconds until the status LED blinks, then release the reset button. When the reset is complete, the status LED will be off.

Warning: Hardware reset will reset all the settings you have made previously.

Software reset
To initiate a software reset, please proceed through the following steps:
• a. Click the Restart button on the lower right side of the Restart window.

• b. Select Factory Default Settings in the Restart Router pane.

•c. Then click Restart.

After a minute, the status LED will begin to blink. The LED will turn off after the default settings are reset.

Note: If the above steps do not provide login access, please contact your dealer for help.