In the example below, we guarantee all the web traffic from WAN2 to the local network to be 10% of WAN2 inbound bandwidth and set its maximum value to be 30% of WAN2 inbound bandwidth.

Note: If you’re using BiGuard30, please remember to create the QoS rules for both WAN ports if both WAN ports can connect to the ISP.

In the example below, we guarantee all the web traffic from local network to WAN2 to be 10% of WAN2 outbound bandwidth and set its maximum value to be 30% of WAN2 outbound bandwidth.

Note: If you’re using BiGuard30, please remember to create the QoS rules for both WAN ports if both WAN ports can connect to the ISP.