ADSL Compliance
• Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
• Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)
(BiPAC 7300(G)RA A only)
• Compliant with ADSL2+ Standard
- G.dmt.bisplus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(BiPAC 7300(G) RA A only)
Network Protocols and Features
• NAT, static routing and RIP-1/2
• NAT supports PAT and multimedia applications
• Transparent Bridging
• Virtual Server and DMZ
• SNTP, DNS relay and DDNS
• IGMP snooping and IGMP proxy
Firewall & Virtual Private Network (VPN)
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack,
Ping of Death, etc.
• Remote access control for web base access
• Packet and URL filtering
• Password protection for system management
• VPN pass-through
Quality of Service Control
• Supports the DiffServ approach
• Traffic prioritization based-on IP protocol,port number and address
Wireless LAN (BiPAC 7300G RA)
• Compliant with IEEE 802.11g and
802.11b standards
• 2.4 GHz – 2.484G Hz frequency range
• Up to 54 Mbps wireless operation rate
• Auto channel select
• 64/128 bits WEP supported for encryption
• Wireless Security with WPA-PSK/WPA2-PSK
support
• WDS repeater function support
ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5
(RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• OAM F4/F5
Management
• Quick Installation Wizard and Auto-scan
ADSL settings
• Web-based for remote and local management
• Firmware upgrades and configuration data
upload/download via web-based interface
• Embedded Telnet server for local management
• SNMP v1/v2/v3, MIB-I and MIB-II support
• Available Syslog monitoring
• Supports DHCP server/client/relay
• Mail Alert
Operating Environment
• Operating temperature: 0 - 40ºC
• Storage temperature: -20 - 70ºC
• Humidity: 20 - 95% non-condensing
Hardware Specifications
Physical Interface (BiPAC 7300G RA)
• WLAN: 1 detachable antenna
• LINE: ADSL port
• LAN: 4-port 10/100M auto-crossover (MDI/MDI-X) switch
• Factory default reset button
• Power jack
• Power switch
Physical Interface (BiPAC 7300G RA)
• Power jack
• Factory default reset button
• LAN: 4-port 10/100M auto-crossover (MDI/MDI-X) switch
• LINE: ADSL port
Physical Specifications
• BiPAC 7300G RA
Dimensions: 7.28" x 4.86" x 1.42"
(185mm x 123.5mm x 35mm)
• BiPAC 7300 RA
Dimensions: 5.51" x 3.54" x 1.38”
(140.5mm*90.5mm*35mm)
Power Requirements
• Input: 12V DC, 1A
Models & Supported Standards
• BiPAC 7300(G) RA A: Annex A & Annex M
(Annex A and Annex M: ADSL over POTS)
• BiPAC 7300(G) RA U: Annex B & U-R2
(Annex B and Annex U-R2: ADSL over ISDN)
*Notes:
1. The router may require firmware modification for certain ADSL2/2+/ Annex M DSLAMs.
2. Specifications in this datasheet are subject to change without prior notice.
|