The Second Ethernet WAN
The BiPAC 7800(N) series uses a Dual-WAN approach with an ADSL2+ port and a separate RJ-45 WAN port that offers another broadband connectivity option for connecting to Cable, VDSL or Fiber modems.

Express Internet Access
The BiPAC 7800(N) series is compliant with worldwide ADSL standards, and supports download rates of up to 12/24Mbps using ADSL2/2+, 8Mbps using ADSL and an upload rate of up to 1Mbps. The integrated Annex M standard supports ADSL2/2+ for higher uploads by doubling the upload data rate. The 4-port Gigabit Switch incorporated into the BiPAC 7800(N) enables users to connect to multiple computers or wired-Ethernet devices easily and enjoy blistering LAN transmission for multimedia applications such as interactive gaming, IPTV video streaming and real-time audio.

Smooth, Responsive Net Connection*5
Quality of Service (QoS) gives users full control over outgoing data traffic. Priority can be assigned by the router to ensure that important transmissions like gaming packets, VoIP calls or IPTV/streaming content passes through the router at lightning speed, even when there is heavy Internet traffic. The speed of different types of outgoing data passing through the router is also controlled to ensure that users do not saturate bandwidth with their browsing activities.

Robust Firewall Security
The NAT default firewall has advanced anti-hacker pattern-filtering protection features that automatically detect and block Denial of Service (DoS) attacks. In addition, Packet Filtering provides high-level security for access control. Built with Stateful Packet Inspection (SPI), the router enables users to determine whether or not a data packet is allowed to pass through the firewall to the private LAN.

Optimal Wireless Speeds and Coverage (BiPAC 7800N)
With an integrated 802.11n Wireless Access Point, the router delivers up to 6 times the speed and 3 times the wireless coverage of an 802.11b / g network device. It supports a data rates up to 300Mbps and is also compatible with 802.11b / g equipment. The Wi-Fi Protected Access (WPA-PSK / WPA2-PSK) and Wired Equivalent Privacy (WEP) features enhance the level of transmission security and access control over Wireless LAN. The router also supports the Wi-Fi Protected Setup (WPS) standard, allowing users to establish a secure wireless network by simply pushing a button. If the network requires wider coverage, the built-in Wireless Distribution System (WDS) repeater function allows users to expand the wireless network without the need for any external wires or cables.

BiPAC 7800 Dual WAN ADSL2+/Broadband Firewall Router

BiPAC 7800N 802.11n Dual WAN ADSL2+/Broadband Firewall Router

ADSL Compliance
• Compliant with ADSL Standard
   - Full-rate ANSI T1.413 Issue 2
   - G.dmt (ITU G.992.1)
   - G.lite (ITU G.992.2)
   - G.hs (ITU G.994.1)
   - ADSL over ISDN / U-R2
• Compliant with ADSL2 Standard
   - G.dmt.bis (ITU G.992.3)
   - ADSL2 Annex M (ITU G.992.3 Annex M) (BiPAC 7800(N)A only)
• Compliant with ADSL2+ Standard
   - G.dmt.bis plus (ITU G.992.5)
   - ADSL2+ Annex M (ITU G.992.5 Annex M) (BiPAC 7800(N)A only)

Network Protocols and Features
• NAT, static routing and RIP-1 / 2
• Universal Plug and Play (UPnP) Compliant
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
• IGMP snooping for video service
• Management based-on IP protocol, port number and address
• SMTP client with SSL/TLS

Firewall
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack, Ping of Death, etc.
• Remote access control for web base access
• Packet Filtering - port, source IP address, destination IP address, MAC address
• URL Content Filtering - string or domain name detection in URL string
• MAC Filtering
• Password protection for system management
• VPN pass-through

Quality of Service Control*5
• Supports the DiffServ approach
• Traffic prioritization and bandwidth management based-on IP protocol, port number and address

ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• Classical IP over ATM (RFC 1577)
• MAC Encapsulated Routing (RFC 1483 MER)
• OAM F4 / F5

IPTV Applications*2
• IGMP Snooping
• Virtual LAN (VLAN)
• Quality of Service (QoS)*5

Wireless LAN (BiPAC 7800N)
• Compliant with IEEE 802.11n, 802.11g and 802.11b standards
• 2.4 GHz - 2.484 GHz frequency range
• Up to 300Mbps wireless operation rate
• 64 / 128 bits WEP supported for encryption
• WPS (Wi-Fi Protected Setup) for easy setup
• Wireless Security with WPA-PSK / WPA2-PSK support
• WDS repeater function support
• 802.1x radius supported
• WLAN on/off time schedule control

Management
• Easy Sign-On (EZSO) and Auto-scan ADSL settings
• Web-based GUI for remote and local management
• Firmware upgrades and configuration data upload and download via web-based GUI
• Embedded Telnet server for remote and local management
• Available Syslog
• Mail Alert for WAN IP Changed
• Wake On LAN
• Supports DHCP server / client / relay
• TR-069*3 supports remote management
• SNMP v1/v2/v3 *3 supports remote and local management

Hardware Specifications
Physical Interface
• WLAN: 3 x 2dbi detachable antennas (BiPAC 7800N only)
• DSL: ADSL port
• EWAN: RJ-45 Ethernet port for connecting to ADSL / Cable / VDSL / Fiber modem device
• Ethernet: 4-port 10 / 100 / 1000M auto-crossover (MDI / MDI-X) Switch
• Factory default reset button
• WPS push button (BiPAC 7800N only)
• Power jack
• Power switch
Physical Specifications
• Dimensions: 9.04" x 6.10" x 1.69" (229.5mm x 155mm x 43mm)
Power Requirements
• Input: 12V DC, 1.5A

Operating Environment
• Operating temperature: 0 – 40°C
• Storage temperature: -20 – 70°C
• Humidity: 20 – 95% non-condensing

Models & Supported Standards
• BiPAC 7800(N) A: Annex A and Annex M (Annex A and Annex M: ADSL over POTS)
• BiPAC 7800(N) U: Annex B and U-R2 (Annex B and U-R2: ADSL over ISDN)

*Notes:
1. The router may require firmware modification for certain ADSL2 / 2+ / Annex M DSLAMs.
2. IPTV application may require subscribing to IPTV services from a Telco / ISP.
3. Either TR-069 or SNMP v1/v2/v3 can be available; but only upon request for Telco / ISP tender projects. The TR-069 and SNMP v1/v2/v3 software can only be applied to one device and will not work together on the same device.
4. Specifications in this datasheet are subject to change without prior notice.