SHDSL Compliance
• Compliant with ITU-T G.991.2 Standard
• Compliant with ITU-T G.991.2.bis Standard
• Symmetric data rate of up to 5.7Mbps on 2-wire; 11.4Mbps on 4-wire
• Rate Adaptive Mode
EFM Compliance (software upgradeable)
• Compliant with IEEE 802.3ah
Network Protocols and Features
• NAT, static routing and RIP-1 / 2
• Universal Plug and Play (UPnP) Compliant
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
Firewall
• Built-in NAT firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including IP Spoofing, Land Attack, Smurf Attack, Ping of Death, TCP SYN Flooding, etc.
• Packet Filtering – port, source IP address, ination IP address, MAC address dest
• URL Content Filtering – string or domain name detection in URL strings
ATM and PPP Protocols
• Supports ATM over SHDSL.bis and SHDSL
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocols over AAL5 (RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing ? PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• Classical IP over ATM (RFC 1577)
• MAC Encapsulated Routing (RFC 1483 MER)
Quality of Service Control
• Supports the DiffServ approach
• Traffic prioritization and bandwidth management based on IP protocol, port number and address
Virtual Private Network (VPN) (BiPAC 8501)
• Embedded IPSec and PPTP client / server
• IKE key management
• DES, 3DES and AES encryption for IPSec
• MPPE Encryption for PPTP
• L2TP over IPSec
• L2TP / PPTP / IPSec / VPN pass-through (BiPAC 8501 / 8501 R2 / 8521)
Management
• Web-based GUI for remote and local management
• Firmware upgrades and configuration data upload and download via Web-based GUI
• Embedded Telnet server for remote and local management
• SNMP v3, MIB-I and MIB-II supported
• Supports DHCP server / client / relay
Operating Environment
• Operating temperature: 0 - 40°C
• Storage temperature: -20 - 70°C
• Operating Humidity: 20 - 95% non-condensing
Hardware Specifications
Physical Interface
• WAN: 1 x SHDSL port (BiPAC 8501 / 8501 R2); 2 x SHDSL ports (BiPAC 8521)
• Console: PS2
• LAN: 4-port 10 / 100M auto-crossover (MDI / MDI-X) Switch
• Factory default reset button
• Power jack
• Power switch
Physical Specifications
• Dimensions: 7.09" x 4.72" x 1.57" (180mm x 120mm x 40mm)
Power Requirements
• Input: 12V DC, 1A
Notes:
Specifications in this datasheet are subject to change without prior notice.
|