No sweat to set up an in-home Network
The BiPAC 2070P does not require time and money to install expensive Ethernet cables throughout your house in order to share your home network. Nor does it require any drilling. Just one touch on the Network Set-up button to install the bridge utility and your high-speed network is ready. It’s as easy as simply plugging in your networking devices using the electrical wiring in your home.

Smooth Traffic and Prioritization
Quality of Service control guarantees the transmission quality by automatically prioritizing data. The BiPAC 2070P automatically recognizes the bandwidth needs of voice and video applications. QoS prioritizes the data to guarantee optimal results. TV and video images are received and displayed with absolute smoothness. QoS also guarantees clear, instant transmission of voice data, even when other applications are running on the network at the same time. QoS makes your network a pleasure to use.

Immune to Noise and Intervention
Unlike others, the device supports to deliver superior and noise-immune data transmission over in-home power lines through which electricity is carried all around your house. You don’t hear any annoying sound generated from transmitting bandwidth-consuming applications like IPTV. Even at the moment when your family turns on an electronic device or turn off a light, the display of latency-sensitive applications such as multimedia or video that you are sharing with your family in the other room will not suddenly break down or freeze a second.

Companion with Billion Routers
With a built-in 12V DC adapter you can connect the BiPAC 2070P with any Billion ADSL router of power input 12V DC, 1.2A or below, so it saves on the need for an extra power adapter.

The connected home using the BiPAC 2070P

Connecting the BiPAC 2070P

	Step 1. Connect a network cable and a power adapter to the bridge, and then plug the BiPAC 2070P into a power outlet.
	Step 2. Then connect the BiPAC 2070P by the network cable and the 12DC power cable to a modem, router or a set-top-box.
	Step 3. Create a secure network with a simply push off the network set-up button.

Protocols
• TDMA, CSMA/CA

Standards
• Ethernet specifications: IEEE 802.3, IEEE 802.3x, IEEE 802.3u, Auto MDI/MDIX
• HomePlug AV compliant

Transmission speed
• 200Mbps max.

Modulation
• Supports OFDM - 1155 carriers,1024/256/64/16/8 QAM, QPSK, BPSK and ROBO

Frequency Range
• 2MHz ~ 30MHz

Security
• 128-bit AES Link Encryption with key management for securepower line communications
• Encryption:
   - NMK (Network Membership Key) used to authenticate/access
   - Rotating NEK (Network Encryption Key)

Quality of Service Control
• Enhancements: contention-free access, four-level priority based contention access, and multi segment bursting
• ToS, CoS and IP Port Number Packet Classifiers
• Supports IGMP managed multicast sessions
• IGMP snooping with multicast to multiple unicast support in CSMA
• QoS classification for quasi-error-free delivery
   - VLAN priority field, ToS Field
• Enhanced IPv4/IGMPv1-3 snooping support
• Supports IPv6 and MLDv1-2 snooping

Supported Operation Systems
• Windows 98 / 98SE / Me / NT / 2000 / XP
• Other 10/100 Base-T Ethernet devices

Device port
• Ethernet RJ-45

Power Supply Specifications
• Input: 100~240V AC, 50~60Hz
• Output: 12V DC, 1.2A
• Protection: OCP, OVP, SCP

Hardware Specifications
Physical Interface
• RJ-45 compatible
• Power DC jack
• Sync button
• Reset button
• Power AC socket
• LED display:
   - Power
   - Ethernet (Link/Act)
   - PLC (Powerline Link/Act)
Physical Specifications
• Dimensions(W, D, H): 75x114x63mm
Operating Environment
• Operating temperature: 0 ~ 40 °C
• Storage temperature: -20 ~ 70 °C
• Humidity: 20 ~ 95% non-condensing

Available Product Package
• BiPAC P101 HomePlug AV 200 Desktop Enabling Kit
   - includes 1x BiPAC 2070P and 1x BiPAC 2070
   - ideal for supporting all Billion ADSL2+ router series
     with power input 12V DC, 1.2A or below