Management:
• Supports OMCI (ONT Management and Control Interface) remote management
• TR-069*4

VoIP:
• Voice over IP compliant with SIP standards
• Two FXS ports for connecting to regular telephones
• Supports FAX Transmission: T.38 fax relay, G.711 pass-through
• Supports mini-IP PBX Features (optional)

Firewall:
• SOHO Firewall Security with DoS Prevention and SPI

QoS:
• Quality of Service for traffic
• prioritization and bandwidth management
• Supports IPTV Applications*2
• Easy Sign-On (EZSO)

Ideal for
• Home, SOHO and Office users

Mini IP-PBX for VoIP calls (optional)
The BiPAC 9300VU is compliant with SIP standard (RFC3261) and supports SIP registrar. The unique feature of the gateway is that it can be used as a mini IP-PBX that supports up to 20 user accounts for SIP extensions and 2 SIP accounts for making economical VoIP calls provided by Internet Telephony Service Providers (ITSP). This router series integrates two FXS ports allowing users to make or receive phone calls over the Internet simply by connecting the device to their existing telephone set. This state-of-the-art feature is ideal for SOHO users, delivering free communication between branch offices and client sites. Making VoIP calls is just as easy as dialing an extension number!

OMCI remote management
In order to meet the ITU-T G.984.4 requirements for OMCI (ONT Management Control Interface), and defined compatibility and message transfer between OLT and ONT, and Management Information Base (MIB) physical device management, the BiPAC 9300VU uses OpenCon’s OMCI management. This tool is field-proven and interoperable with other GPON Systems with OMCI capabilities for both OLT and ONT equipment. OpenCon’s OMCI management has been thoroughly tested to consistently meet ITU-T G.984.4 and is approved by the Full Service Access Network (FSAN) Group.

BiPAC 9300VU - Outdoor GPON VoIP SFU

GPON Compliance
• Compliant with ITU-T G.984 GPON standards
• G.984.1 General characteristics
• G.984.2 Physical Media Dependent (PMD) layer specifications
• G.984.3 Transmission convergence layer specifications
• G.984.4 Management and control interface

Network Protocols and Features
• NAT, static routing and RIP-1 / 2
• Universal Plug and Play (UPnP) Compliant
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
• Supports DHCP server / client / relay

Firewall
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Packet Filtering - port, source IP address, destination IP address, MAC address

Quality of Service Control
• Supports the DiffServ approach
• Traffic prioritization and bandwidth management based-on IP protocol, port number and address

IPTV Applications*2
• IGMP proxy and snooping for video service
• Virtual LAN (VLAN)
• Quality of Service (QoS)

VoIP
• Compliant with SIP standard: RFC3261
• Two RJ-11 FXS ports for connecting to regular telephones
• Supports two SIP accounts for connecting to Internet Telephony Service Provider (ITSP)
• Supports SIP extensions
• Supports G.711 A / μ law, and G.729 Audio CODEC standards
• Supports FAX Transmission: T.38 fax relay, G.711 pass-through
• Supports Telephony Features: silence suppression, Voice Activity Detection (VAD), Comfort Noise Generation (CNG), G.168 echo cancellation, packet loss concealment
• Supports mini-IP PBX Features (optional): Call Waiting, Call Transfer*3, Call Hold*3, Call Forward*3, Speed Dial, Direct Inward Dialing (DID), Do Not Disturb (DND), Caller ID, Call Detail Record*3, Call blocking*3, 3-way conference, Meeting Room*3
• Adaptive jitter buffer support
• DTMF: In-band / out-of-band (RFC2833) / SIP INFO

Management
• Quick Installation Wizard and Auto-scan for GPON settings
• Web-based GUI for remote and local management
• Firmware upgrades and configuration data upload and download via web-based GUI
• Embedded Telnet server for remote and local management
• SNMP v3, MIB-I and MIB-II support
• Supports DHCP server / client / relay
• OMCI supports remote management
• TR-069*4

Hardware Specifications
Physical Interface
• WAN: SC/APC GPON port
• Telephone: 2-port FXS
• LAN: 4-port Gigabit auto-crossover (MDI/MDI-X) Switch
• Factory default reset button
• UPS Power connector 4Pin/7Pin
• Grounding connector

Physical Specifications
• Dimensions: 12.8” H x 9.6” W x 3.5” D (325 x 245 x 90mm)
9” H x 8” W x 1.5” D (FRU) (89.8 x 79.3 x 14.8mm)
• Power Requirements: Input: 12V DC, 1.0A

Operating Environment
• Operating temperature: -40°C ~ 50 °C
• Storage temperature: -40°C ~ 70 °C
• Humidity: 20% ~ 95% non-condensing