ADSL Compliance
• Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
• Compliant with ADSL2 Standard
G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)
(Available for BiPAC 5200 RCA model only)
• Compliant with ADSL2+ Standard
- G.dmt.bisplus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(Available for BiPAC 5200 RCA model only)
Network Protocols and Features
• NAT, static routing and RIP-1/2
• NAT supports PAT and multimedia applications
• Multi-to-multi NAT
• Transparent Bridging
• Dynamic Domain Name System (DDNS)
• SNTP
• DNS relay
Firewall & Virtual Private Network (VPN)
• Built-in NAT Firewall
• Prevent DoS attacks including Land Attack
Ping of Death, etc.
• Anti probe function
• Packet filtering
• Password protection for system management
• VPN pass-through
Quality of Service Control
•Supports the DiffServ approach
•Traffic prioritization based-on IP protocol, port number and address
ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• OAM F4/F5
• ATM QoS: UBR, CBR, VBR-rt, VBR-nrt
Management
• Web-based configuration
• Firmware upgrades and configuration data upload/download via web-based interface
• SNMP v1/v2, MIB supported
• Supports DHCP server/client/relay
• TR-069 Support*
Operating Environment
• Operating temperature: 0 - 40℃
• Storage temperature: -20 - 70℃
• Humidity: 20 - 95% non-condensing
Hardware Specifications Physical Interface
Physical Interface
• DSL: ADSL port
• Ethernet: 4-port 10/100M
auto-crossover (MDI/MDI-X) switch
• Factory default reset button
• Power jack
• Power switch
Physical Specifications
•Dimensions: 5.53" x 3.56" x 1.37" (140.5mm x 90.5mm x 35mm)
Power Requirements
• Input: 12V AC, 0.8A
Models & Supported Standards
• BiPAC 5200 RCA: Supports Annex A and Annex M
• BiPAC 5200 RCU: Supports U-R2 and Annex B
• Annex A and Annex M: ADSL over POTS
• Annex B and U-R2: ADSL over ISDN
*Notes:
| 1. |
The router may require firmware modification for certain ADSL2/2+/Annex M DSLAMs. |
| 2. |
Actual throughput and performance depends on the environment. Normally, the wireless speed is faster if you are closer to the router.
The farther from the router you are, the more wireless range, and slower speed, you get. |
| 3. |
Specifications in this datasheet are subject to change without prior notice. |
|