Product Details

F1 150W LED Driver Series

  • High efficiency - Universal Input Voltages
Billion F1 150W LED Driver series features high voltage/low current output, universal voltage(90~295Vac) input, IP67 dust and water resistant aluminum exterior, high efficiency, high PF value and 4KV surge protection(IEC 61000-4-5), which can operate normally in the severe environment from -40~60 °C. The series supports a variety of outdoor applications including Street light, Industrial lighting (mining lamp and patio lamp), landscape lighting (flood light, projection lamp and LED wash wall light). Meanwhile, the series achieves the goal of smart lighting by supporting 1-10V, PWM, resistive intelligent dimming and Billion LCMS-Smart Streetlight Management Solution.
  • Key Features & Benefits
  • Features & Specifications
  • Application Diagram
​​Features
• Input: 90 ~ 295 Vac
• Power Factor: >0.98 at 115 Vac / ≥ 0.95 at 230 Vac at rated power
• Leakage Current: <0.75mA at 230 Vac/50Hz
• Protection: OTP / OCP / OVP / SCP
• Operating Temperature: -40°C ~ 60°C at rated power
• Operating Humidity: 10% ~ 95% RH non-condensing
• MTBF: 300K hour min. MIL-HDBK-217F (25°C)​
• Three-in-One dimming control (PWM, 1~10V, or resistance)
• Timer dimming control (Please contact Billion for more details)
• Meet 4kV surge-protection standard IEC61000-4-5
• Output current can be adjusted via built in variable resistor
(Please contact Billion for more details)​
MODEL BLL0150F1-30-C BLL0150F1-36-C BLL0150F1-48-C BLL0150F1-54-C
DC Voltage Range 21 ~ 30V 26 ~ 36V 33 ~ 48V 38 ~ 54V
Rated Current 5.25A 4.2A 3.15A 2.8A
Efficiency (Max.) 94%
Rated power 157.5W 151.2W 151.2W 151.2W
Ripple and Noise (Max.) 500mV
Current Tolerance ±5%
Voltage Tolerance ±10%
Set up time (Max.) 2000ms/115 Vac and 1000ms/230 Vac at rated power
Dimension (L*W*H) 211mm x 68mm x 39mm
Weight ≒1000g
Electrical Specifications
Input 90 ~ 305Vac
Power Factor >0.98 at 115Vac / ≧0.95 at 230Vac at full load.P.F≧0.9 at 75% load at 230Vac
Leakage Current <0.75mA at 230Vac/50Hz
Protection OVP / SCP / OTP / OCP
Class II isolation power -
Operating Temperature -40 ~ 60℃ at Full Load.
Operating Humidity 10% ~ 95% RH non-condensing.
MTBF 300K hours min. MIL-HDBK-217F(25℃)